Downdraft booth

‹‹ ››

Downdraft booth - Suction booth

Rate: 200 to 2,000 m³/h.
Installation: ground, table, wall
Objective: to ensure good distribution of the suction flow around the workplace

caracteristics-extractor-fan-palamatic-process.png

Main specifications

Operators working in contact directly with powders and bulk materials, especially during the operations of conditioning or deconditioning, operate in dusty environments. The booth is then used to create a vacuum flow into the work area for their safety. The side screens enable to enclose the work area and minimize the draughts effect.

We have a standard range of suction booth depending on your application, but also customized equipment to meet your site requirements.

 

Main uses

  • For the handling of material and container having different size
  • When dust are emitted from a large surface
  • Chen the operator makes many tasks on the same workplace

drawing-extractor-fan-palamatic-process.jpg

 

 

ANDEP Dimensions Ø E
800 L 800 x P 800 x H 1350
L 800 x P 1000 x H 1600
L 800 x P 1000 x H 1600
Ø 200
1000 L 1000 x P 800 x H 1350
L 1000 x P 1050 x H 1650
L 1000 x P 1050 x H 1650
Ø 250
1200 L 1200 x P 800 x H 1350
L 1200 x P 1100 x H 1650
L 1200 x P 1100 x H 1650
1500 L 1500 x P 800 x H 1350
L 1500 x P 1100 x H 1700
L 1500 x P 1100 x H 1700
Ø 300
2000 L 2000 x P 800 x H 1350
L 2000 x P 1100 x H 1650
L 2000 x P 1100 x H 1650

 

Specifications

Working width: 800 to 2,000 mm
Manufacturing: mild steel, 304 L & 316 L stainless steel
Finishes: 9006 RAL, bead blasted, electropolished
Frontal panels: 1.2 or 3 panels
Air rate reached in open areas: 0.6 to 1 m/s
Air rate reached in dedusting piping: 25 m/s
ATEX grounding clamp
Weight: 10 to 50 kg

Extractor- fan-palamatic-process.png 1. Setting register
2. Slot for distribution of the aspiration
3. Protection of the working area