Bin activator
‹‹ ››
drawing bin activator dn 040 (1.01 MB)
drawing bin activator dn 060 (1.01 MB)
drawing bin activator dn 075 (1.01 MB)
drawing bin activator dn 090 (1.01 MB)
drawing bin activator dn 100 (1.01 MB)
drawing bin activator dn 125 (1.02 MB)
drawing bin activator dn 150 (1.04 MB)
drawing bin activator dn 180 (1.06 MB)
drawing bin activator dn 210 (1.04 MB)
drawing bin activator dn 235 (1.05 MB)
drawing bin activator dn 250 18 (1.08 MB)
drawing bin activator dn 250 32 (1.08 MB)
drawing bin activator dn 300 18 (1.06 MB)
drawing bin activator dn 300 32 (1.06 MB)
Facilitating powder extraction under silos
Composed of a steel or stainless steel cone, weld-free construction, integrated flange joint on top and bottom, silo connection brackets, and one or two electric vibrators. The unloading section must have a large diameter. A flange is welded to the silo cone. Special brackets and a technical polymer gasket form a flexible connection between the silo and the bin activator : one or two electric vibrators are mounted at the bottom on the side and vibrate the entire bottom, without vibrating the silo above it.
During extraction, the bin activator performs a circular movement which is transmitted to the material inside the silo and therefore provides for uniform flow. Using this system optimizes material extraction with excellent mass flow and reduces the formation of bridges and mouse holes. |
Main advantages
- Mechanical extraction without air or vibration and therefore without pollution or settling
- Fitting under the silo with a simple flange
- Works independent of load with full silo emptying
- Low installed power
- Sealed, silent operation
- Easy to install: losose flange, adjustable length, flexible or rigid feeder
- Quick assembly
- Easy recovery or transfer module adaptation
- Independently operating dual feeder
- Reduced floor space required
- Limited silo ground clearance
- Accurate extraction whichever quantity of powder remaining in the silo
Photos
Specifications
- Flow rate from 5 to 320 m3/h.
- Extractor range: Æ 400 mm – 3,000 mm
- Construction: steel, AISI 304L / 316L stainless steel
- Compact, sturdy construction
- Gasket range including an FDA-approved food-processing version and high-temperature material compatibility
- Wide range of deflectors depending on application
- Low energy consumption
- Brackets and gaskets with greater longevity than average
- 70% less welds compared to traditional bin activators
- Weld-free, extra-thick vibrating bottom cone
- Atex zone 22 version available
Drawings


Storage line for granulates
National company specializing in the supply of granulates
Sector :
Read more - CONSTRUCTION INDUSTRY
Additional equipment
- Silo
-
Flexible silo
Great flexibility for storing powdered and granulated materialsSilo