Aero conveyor

‹‹ ››

Conveying of materials requiring flexibility of implementation

Flow rate from 1 to 40 m³/h.
Elevation up to 10 m.
Conveying length up to 50 m.

The conveyor is tightly designed through the integration of tubes and angle gears. The disks, manufactured in synthetic material, are mounted at regular intervals along the chain or the cable.

Operating mode of the aero conveyor


Advantages of the aero conveyor

The inlet of the material is performed at the level of the angle gear pulleys or directly on the conveying tube. The inlets can be multiple.
The outlets fo the material are performed at the level of the pulleys or directly on the tube according to methods with specific valves that are peculiar to the system.
  • Self-cleaning disk system
  • Compliance with crumbly and fragile materials
  • Conveying of materials with heterogeneous density and particule size
  • Flexibility of implementation



Chain or cable conveyor


Flow rates and speeds

  • The use of the chain is related to the power implemented and the length of the conveyor.
  • The aero conveyor engineering using cables allows the implantation of the equipment in food grade industries.
  • Tube Ø: 88,9 - 114,3 - 139,7 - 168,3 - 219,1
  • Flow rate in m³/h. : from 1 to 4
  • Disk movement speed in m./s.: from 0,02 to 0,45
convoyeur-aeromecanique-01.jpg implantation-convoyeur-aeromecan.jpg
2 aero conveyors ensure the loading of a sifter (scraping disks manufatured in food grade nylon)
Maximum rate: around 5m³/h.
Vertical conveying length 3 m.
Buffer hopper capacity: 300 litres