Standard lump breaker
Crushing of materials that tend to form lumps and ensuring flowability of the product
Available in mild steel, stainless steel 304L and 316L
Throughput from 1 to 50 m³/h.
|Our lump breakers are the perfect solution for crushing materials that tend to form lumps. The device allows to break the lumps that form during the production or transportation process of friable materials in powder or grain. The fast rotation of specially shaped blades through a fixed mesh gives an efficient lump breaking action. The presence of two rotors allows high throughputs if required.|
- ATEX standards 20/21/22
- 3 standard sizes
- Built with 2 rotors with blades for lump breaking and a mesh in order to reduce the passage space
- Fixed or variable speed motorization, chain or gear drive
- Manufacturing : mild steel, stainless steel 304L and 316L
Range of lump breaker : EC 35, EC 50 & EC 70
|Models||EC 35||EC 50||EC 70|
|Rotor speed in revolutions per minute||200||180||180|
|Theoretical throughput revolution per hour||25 à 35||40 à 50||50 à 80|
|Product flow area in mm||375 x 375||525 x 525||750 x 750|
|Engine power in Kw||3||5,5||8|
|Clamp in mm||445 x 445||600 x 600||600 x 900|
Discover our Lump breaker custom made.
Their objective is to ensure supply of fluid product.
Lumps must go through a deflector. The lump breaker includes two pin shafts. This model is recommended in the case of friable lumps, without moisture absorption.
The lump breaker consists of a square section body with an upper and lower flange, 2 parallel horizontal shafts, a mesh for big sizes, 4 shaft bearings with adjustable shaft seal and an appropriate drive unit with transmission.
Available in 3 standard sizes (please contact us for the model EC70):
|Rotor speed : 200 tr/min.||Rotor speed : 180 tr/min.|
|Theorical flow : 25 à 35 t./h.||Theorical flow : 40 à 50 t./h.|
|Product section passage : 375 x 375 mm||Product section passage : 525 x 525 mm|
|Engine power : 3 kW||Engine power : 5,5 kW|
|Mounting flange : 445 x 445 mm||Mounting flange : 600 x 600 mm|
1. Electric motor
2. Reduction box
3. Reduction pins
5. Rotor pin
8. Drive side shaft bearings
13. Shaft bearings on opposite side of rotor
- Rotation controller
- Safety switch on inspection door
- Stainless steel construction
- Other product passage dimensions
- Blade shape according to product
In the petrochemical industry, loading of two pressurized reactors from a big bag discharging unit and a sack unloading hopper in Atex 20 zone with resine flakes, polymers
You want to create or optimize your process ?
We have a customized solution