Sorry, you need to enable JavaScript to visit this website.

Drum tipper - DrumFlow® Liquid

  • Essai
  • Plan d'accès
    Description
    Drum tipper DrumFlow Liquid

    DrumFlow® Liquid - Drum tipper for liquid or viscous products

    The drum tipping DrumFlow® Liquid, manufactured in stainless steel, operates automatically by remote control to minimize and eliminate the need for heavy manual work by production operators. The operator does not have to hold the barrel during tilting, or remove the inner liner for cutting and opening.

    The drum vacuum is equipped with a bag and drum clamping system (top of the drum) with a retaining rod (bottom of the bag) mounted on a pneumatic cylinder.

    Operating mode:

    1. Placement of the full barrel on the clamping table. 
    2. Opening of the bag and attachment to the collar of the barrel, by the operator.
    3. Startup of the automatic emptying cycle, once the operator has left the enclosure.
      • Descent of the bag and drum clamping rod. 
      • Tilting of the drum in position 1: 150° - Most of the product is drained.
      • Progressive tilting up to 180°. Complete draining of material.
      • Return to the starting position of the empty drum.
      • Lifting of the clamping rod. 
      • Release of the empty drum and installation of the new drum.
      • Recovery of the discharge bag from the 1st drum for disposal through the rollers, while the second barrel empties.

    DrumFlow® Liquid is available in 3 models: DrumFlow® Liquid 50, DrumFlow® Liquid 150 and DrumFlow® Liquid 300 with tilt differences ranging from 90 ° to 180 °. 

      DrumFlow® Liquid 50 DrumFlow® Liquid 150 DrumFlow® Liquid 300
    Capacity - keg weight 110 lbs 330 lbs 660 lbs
    Barrel height 23.5" 31.5" 39.25"
    Diameter 15.75" 19.5" 23.5"

     

    The drum discharging station consists of:

    • A tilting cradle with electric motor
    • A clamping system for the bag and barrel
    • A receiving hopper
    • Rolling mill
    • A transfer pump
    • Rate
      4
    Partager la page

    Equipment advantages

    • Tilting cradle with electric motor

    • Bag and drum clamping system 

    • Equipment cleanability (CIP system possible)

    • Minimized operator intervention

    View our equipment in videos

    Basculeur fût liquide

    View our equipment in photos

    Raising the barrel for discharging Palamatic

    Raising the barrel for unloading.

    Start van de automatische ontladingscyclus, zodra de bediener de behuizing heeft verlaten.

    Roller mill unloading hopper drum

    Roller Mill Empty Drum Hopper

    Walsmolen Lege Trommel Vultrechter

    Control cabinet DrumFlow Liquid

    Control box DrumFlow Liquid

    Automated control of the drum unloading system with Pal'Touch®.

    Automated drum discharge platform

    Automated platform for unloading drums

    Operator access platform to the drum turner, equipped with a handrail.

    180 degree tilt drummer

    180-degree tilt of the barrel

    Tilt the drum 180° to end the emptying cycle.

    Technical specification

    Transfer rate on viscous product: 7m³ / h

    Transfer rate for non-viscous products: 15m³ / h

    Product discharge pressure: 12 to 15 bars

    Drum tipper with integrated:

    • Completely removable bag holding bar
    • Foot pedal with stainless steel protection 
    • Installation of a stainless steel protective cover to prevent access to the discharge hopper during the Cleaning In Place phase. 

    Safety enclosure:

    • 304 stainless steel safety grid
    • Light curtain
    • Packing of olives

      Treated products: olives in brine - Packing of olives - The objective is the automatic emptying of the drums by turning the drums over.

    Come and test our equipment in our test plant

    1. Personal information

    I would like to have more information:

    2. How can we assist you?

    Note that fields marked with a star "*" are mandatory for sending your message.