Sorry, you need to enable JavaScript to visit this website.

Paldrum®04 packaging for drums - Rotating pallet

  • Essai
  • Plan d'accès
    Description
    Packaging of drums on rotating pallets

    The PalDrum®04 drum filling station with rotating pallet provides semi-automated, high-accuracy filling with twin-screw dosing technology.

    The Palamatic Process D14 twin-screw feeder provides high flow rate and fine precision due to the dual dosing screws. Each auger is driven by an independent motor allowing individualized control and automation. To ensure dosing regularity and maximum precision, the dual screw feeder makes use of an integrated agitator to provide smooth bulk material flow.
     

    Conditionneuse de fûts industrielle


    The double jacketed filling head allows for efficient material filling and connection to your dust collection system. Automated height adjustment of the fill head framework helps improve operator safety, and increase drum-per-hour fill rates, relative to manual operation.

    The semi-automated pallet table allows an operator to load four, empty 200 litres drums at a time. A pre-weighed GIW (loss in weight) hopper prepares the material to be dosed into the drum. Once the first drum is filled, the operator signals the touch screen PLC to commence to the second position on the pallet.

    The Palamatic pre-weigh drum filling scale system provides consistent fill weights in applications where mid- to high-volume throughput requirements are required. While a drum is being filled, the filling system is simultaneously reloading the buffer hopper and pre-weighing material in preparation for discharge and filling into the next drum. The Palamatic Process pre-weigh systems is accurate to +/- 0.5% of the total filled drum weight (better accuracy possible in some applications).

    For drums with an inner liner, the inflatable seal deflates releasing the dust tight connection to the drum. The pallet turns 90° to the second drum position. The operator places the inner liner around the inflatable seal and signals the control panel to resume the filling operation. The seal inflates to make a secure and dust tight connection.
     

    The different possible configurations of the PalDrum®04 model:

      Ref. Integrated
    Equipment
    Functions Advantages
    Choice 1 I Inflatable seal Secure connection to inner liner Maximum confinement
    C Cover lid Dust containment of open drums  Ergonomic design, various drum sizes
    Choice 2  Loss Loss in weight Accurate preparation of the material Accelerated rate (dosing in hidden time) / may requite double check weighing
    Gain Gain in weight Weighing of the entire container and contents Commercial weighing, traceability
    Pallet turn table MT Motorized turntable Semi-automatic placement of drums under the filling head Safe orientation of drums on their pallet.


    Our PalDrum®04 packaging machine is configurable by modulating the possible basic equipment: choix 1 + choice 2.
    Exemple of possible reference: PalDrum®04-I-MT-Loss


    Description of choices:

    Choice 2, 2 weighing modes:
    As with all PalDrum® stations, the weighing technology can be selected according to your throughput.:

    • Gain-in-weight: for weighing drums during filling (IPFA commercial weighing certification)
    • Loss-in-weight: for weighing your products upstream and checking the weight after packaging on a secondary conveyor (IPFA commercial weighing certification)

    For manufacturing processes that require a safe and secure filling procedure with the drums already on the pallet, the PalDrum®04 drum filling system offers all the necessary modular configurations, primarily:

    • Semi-automatic turn table system
    • Dust control by inflatable seal or pneumatic drum cover
    • Automatic weighing and dosing
    • Digital weight display
    • Labeling (optional)

     

    • Automation
      5
    • Rate
      5
    • Dosage accuracy
      4
    Partager la page

    Equipment advantages

    • Optimized safety:
      - Drums never leave the pallet
      - Security light barriers at operator working position
    • Semi-automated drum positioning
    • Accurate material dosing by weight
    • Adaptable to various drum types and connections

    View our equipment in photos

    Semi automatic drum filling

    Rotating flange for filling on pallet

    Fake lid to ensure a tight filling of the barrel.

    Filling of industrial drum

    Positioning of the lid on the drum

    The operator manually connects the drum/bucket to the filling opening.

    drum filling system powder handling

    Containment of the filling station

    Filling head on drums for confined filling.

    drum filling system powder handling palamatic process

    Filling of drums

    Industrial line for automatic packaging of drums.

    Technical specification

    Rate 40 to 60 drums per hour
    Capacity220 kg 220 kg/drum
    Materials of construction Painted steel, 304 or 316 Stainless Steel
    Accuracy Possibility of +/-0,5%
    Theoretical Power consumption 7.5 à 10 kW
    Dust removal rate 200 m³/hr


    Mode opératoire :

    1. The material is prepared in the dual dosing screw feeder (operation can be done in parallel with drum preparation to improve global flow rate of PalDrum® 04)
    2. The operator connects the inner liner to the inflatable clamping seal, or, for drums with no liner a pneumatic cylinder with cover lid is lowered onto a resting position over the drum for dust containment. 
    3. High flow auger (primary): The material is dosed into the buffer hopper on load cells.
    4. Precision auger (secondary): The material nears target weight causing the automatic switching from the high flow auger to precision auger for accuracy. 
    5. Target weight is reached, dual screw feeder shuts off.
    6. The automatic butterfly valve releases the material into the drum below. 
    7. The inflatable seal (or cover lid) releases its connection to the drum.
    8. The operator signals the control panel to prepare the next drum. 
    9. The turn table rotates the pallet 90° to the second drum position and the next fill sequence repeats the cycle. 
    Remplissage de fûts sur palette tournante

    Pallet Turntable Technical Specifications:

    • Capacity: 100 kg
    • The rotation stroke is activated by air cylinder an electric motor
    • Physical barriers are mounted at both ends of the stroke
    • Four heavy duty urethane wheels support the turntable rotation
    • The surface is a chain driven live roller conveyor
    • Welded safety skirt is provided around the perimeter
    • All steel heavy duty welded construction
    • The complete 90-degree cycle rate is thirty seconds 

     

    Available options

    • Powder sampler
      Powder sampler

      Sampler on filling head

      The sampler is installed on the drum filling station. It ensures an automatic sampling at each packaging. Traceability is thus guaranteed. The volumetric sampling in the product flow guarantees a representative sampling.

    • Drum filling - Bulk materials - Roller conveyor
      Drum filling - Bulk materials - Roller conveyor

      Gravity or motorized feeding and/or evacuation

      It can be installed on scales.
      The conveyor can be equipped with a raised frame to ensure the maintenance of the drums.

    • Tube lifter for barrels
      Tube lifter for barrels

      Effortless lifting and handling of the drum

      The drum and canister manipulator offers the operator maximum ergonomics. The problem of carrying loads is completely solved by the installation of this equipment.

       

    • Magnetic bars
      Magnetic bars

      Magnetic bars

      Capture of metal particles at the end of the line before packaging in drums to ensure a high quality finished product.
      The bars are positioned at the heart of the product flow to retain the metal particles.

    • Lid sealer
      Lid sealer

      Drum sealing and lid removal machine

      Manual tight closing of the drum.
      Lid removal can be done automatically.

    • Clip on bag in barrel
      Clip on bag in barrel

      Clip machine for the closing of the internal bag

      Closing of the bag: manual or automatic clip closing system, compatible with applications for the food industry.

    • Industrial sealer for bags
      Industrial sealer for bags

      Industrial sealer for plastic bags

      Bag sealer - output from 4 to 20 bags/min.
      If the sealer is manual, a load balancer can be installed. It is particularly suitable for plastic bags with a sealing length (width) from 650 to 1000 mm. It is available in several versions according to the chosen sealing technology: double impulse sealing, thermal sealing, hot air sealing.

    • Vibrating motor
      Vibrating motor

      Vibration system to compact the product

      The vibration of the bag/drum at the end of the packaging process optimizes the filling volume. Other packing alternatives: air compression or mechanical pressure.

    Come and test our equipment in our test plant

    1. Personal information

    I would like to have more information:

    2. How can we assist you?

    Note that fields marked with a star "*" are mandatory for sending your message.