Select your Office
Description
Maintaining the product in motion during long periods of storage
The vibrating bin aerators are used to facilitate the flow of materials as powder and granules. They combine a pressurized fluidizing effect with a slight vibration against the wall of the hopper.
Fluidization and vibration
Powder handling solutions: our vibrating bin aerators combine a fluidization effect with 2 to 6 bar pressure with light vibration against your hopper wall.
Operating mode
Compressed air is introduced in the material directly through the silicon lip adhering directly to the internal silo wall. Vibration intensity is set through the service pressure between 2 and 6 bar. With intermittent operation and a maximum 5 seconds jet, air consumption is extremely low.
-
Efficiency5
-
Air consumption4
-
Noise level4
Equipment advantages
- Heavy duty construction
- Self-cleaning
- Anti-abrasive
- Easy to install
- Service pressure from 2 to 6 bar
- Ambient temperature from -40°C to 170°C
- For powders and granules
- FDA approved
Media
View our equipment in photos
Vibrating bin aerators
Vibrating bin aerator on a cocoa packing line with integrated sieving.
Vibrating bin aerators Palamatic Process
Vibrating bin aerators on compounding process line.
Pneumatic vibrator
Pneumatic vibrator on a glue manufacturing process line.
Vibrating bin aerator bulk handling materials
Vibrating bin aerator on a conveyor and storage line for pharmaceutical powders.
Pneumatic ball vibrator
Pneumatic ball vibrator on a process line for mixing and packaging phytotherapeutic materials.
Pneumatic vibrator
Pneumatic vibrator on storage hopper on a line for mixing natural additives for veterinary use.
Anti-bridging device - Conical bottom
Anti-bridging device with conical bottom on a process line for handling natural food flavours.
Anti-bridging device - Flat bottom
Mechanical unloader with flat bottom on industrial powder handling line.
Features
Technical specification
| Air consumption | |||
|---|---|---|---|
| 2 bar dm³/min bar | 4 bar dm³/min bar | 6 bar dm³/min bar | |
| VB/VBI | 100 | 150 | 250 |
| VBE | 100 | 150 | 250 |
| VBM | 70 | 90 | 250 |
Implementation
Case studies
CASE STUDIES WITH THIS EQUIPMENT
Cementation of nuclear waste
Processed powders: Cement + filler, lime and calcium nitrate - Cementation of nuclear waste - This process is intended for the cementation of fines and resinsEnergy
-
Powder incorporator feeding system (powder/liquid mixer)
Processed powder: Mallow powder with a bulk density of 0.5 kg/m³. - Powder incorporator feeding system (powder/liquid mixer) - The purpose of the installation is the vacuuming of mallow powder for...Fine chemical
