Select your Office
003 348 819 8178Screw feeder & vibrating feeder:
Palamatic Process offers to our bulk solids manufacturers and processors a wide range of dosing equipment.
Vibrating feeder
Extraction and weighing, Up to 2 t./h., Fragile or abrasive materials...
-
Dosage accuracy4
-
Hygiene5
Micro dosing spoon – SpoonMatic®
Dosing of micro-ingredients - High dosing accuracy
-
Dosage accuracy5
-
Efficiency5
-
Dosage capacity2
Screw feeder - 4 models from D10 to D13
Weight or volumetric dosing system, from 37 to 9,666 lbs/hr.
-
Dosage accuracy5
-
Hygiene4
The screw feeder is used to meter and dose powders and bulk materials for all industrial sectors, including food & beverage, chemical, pharmaceutical and plastic. The screw feeder allows a controlled feed of raw bulk materials, without degradation or attrition, to downstream process equipment. Common examples of process equipment needing a controlled feed to run efficiently are mills and screeners.
Palamatic Process also provides vibrating feeders. The vibratory conveyor unit is used to dose fragile or delicate bulk materials. All parts in contact with the bulk material are made of stainless steel to avoid any degradation of the powder or bulk material.
The vibrating feeder can provide a consistent regular volume of bulk material from hopper and other IBC's. The accuracy of this type of dosing unit depends on the material characteristics of the powder.
You would like to set up a dosing system within your production line but are unsure about the most suitable solution? Discover our white paper on the subject: How to select your dosing system?
