Select your Office
003 348 819 8178To promote the flow of your powders and bulk materials:
Some powders can be sticky, cohesive, lumpy, hygroscopic or abrasive. These material characteristics can lead to particle segregation, arching, bridging, rat-holing or retention phenomena which makes their flow difficult within industrial equipment.
Palamatic Process has developed a range of equipment to facilitate the flow of materials inside hoppers or silos by offering highly efficient and innovative solutions.
Electric vibrator
To improve the flow of difficult material
-
Efficiency4
-
Noise level5
-
Air consumption3
Pneumatic ball vibrator S8 to S36
Assistance in the flow of difficult products Pneumatic ball vibrators...
-
Efficiency4
-
Air consumption4
-
Noise level2
Anti-bridging device - Flat bottom
Mechanical stirring, Facilitate the flow of powders below silo or...
-
Efficiency4
-
Air consumption1
-
Noise level3
Pneumatic roller vibrator OR
Pneumatic roller vibrators improve the flow of products in the hoppers...
-
Efficiency4
-
Air consumption4
-
Noise level2
Bin activator
To facilitate the powders extraction under hopper
-
Efficiency4
-
Air consumption1
-
Noise level4
Pneumatic turbine vibrator OT
Turbine pneumatic vibrators prevent materials from adhering to the...
-
Efficiency5
-
Air consumption4
-
Noise level4
Anti-bridging device - Conical bottom - DEVCY
Rotating blades or conical screw, Ease the flow of powders and bulk...
-
Efficiency5
-
Air consumption1
-
Noise level2
Vibrating bin aerators VB/VBI, VBE, VBM
Powder handling solutions: our vibrating bin aerators combine a...
-
Efficiency5
-
Air consumption4
-
Noise level4
Fluidization plates
Maintaining the product in motion during long periods of storage
-
Efficiency4
-
Air consumption4
-
Noise level5
Pneumatic hammers PS
The pneumatic hammers are an efficient solution against the bridging...
-
Efficiency4
-
Air consumption5
-
Noise level3
Several flow aids can be integrated into our equipment solutions by Palamatic Process according to your material:
- Pneumatic vibrators (ball, roller or turbine) which are used to facilitate the emptying of silos, chutes, vibrating corridors, sieves and vibrating tables. They are suitable for explosive or wet environments and can be operated outdoors.
- Electric vibrators to promote the flow of industrial powders under hoppers or silos to improve material discharge or as actuators on vibrators for conveying, screening, compacting and sorting.
- Vibrofluidisers to meet environmental and temperature protection requirements.
- Anti-bridging device (flat bottom, conical bottom) according to the characteristics of your powder (wet clogging...).
- Combined strikers
The ability of a powder to flow well is an important parameter to take into account before any manufacturing process. Discover the 7 properties of powders to know before launching your project.